Voice

Moving a Telephone To move a Telephones between exsiting location: LD 10 for Analog Phones LD 11 for Digital Phones LD 20 (RLS 19 and above) REQ: MOV TYPE: (Phone Type/Model) TN: (From TN) TOTN: (To TN (new)) Enter Through… Example: Extension 2000 mapped to TN 12 0 0 0 with phone is type 2008 …

Moving a Phone in a Meridian System – LD 10, LD11 and LD 20 Read More »

Some Class of Service (CLS) codes can be configured to [A]llow or [D]eny by changing the last letter of the code appropriately.  For Example, CNDA allows Calling Party Name Display, while CNDD denies display of the Calling Party’s Name. AAD :: Automatic Answerback Denied ABDD :: Abandoned Call Record and time to answer Denied ADD :: Automatic …

Meridian PBX Class of Service Read More »

Load 11 is used to print or displaying a Meridian phone configuration Steps 1 through 6 will assist to map a DN (extension) to a TN. Printing of displaying the TN will give more details of the actual phone. Dos are only maps to TNs. Log into your Meridian PBX LD 11 REQ: PRT TYPE: …

Printing or Displaying a Meridian Phone Configuration – LD 11 Read More »

Load 02 (LD 02) is used to change the date and time of your Meridian system. First, login to the Meridian system Second, get into load 2 by typing LD 02 then, STAD “Day Month Year Hour Minute Second”
 (STAD 24 11 1976 15 41 49 – November 24th 1976 3:41PM 49 seconds”) Finally, test …

Change Meridian Date and time – LD 02 Read More »

Launch HyperTerminal Set phone number to your modem dialin number Set terminal emulation to VT102            X Modem Dial… it should end up at a blank HyperTerminal window Type the password to access the PBX modem. This will not show up on the screen when you type it. The screen should now display “Ok, You are now …

Login and Out of a Meridian PBX and VOICEMAIL Systems Read More »