Change Meridian Date and time – LD 02

Load 02 (LD 02) is used to change the date and time of your Meridian system. First, login to the Meridian system Second, get into load 2 by typing LD 02 then, STAD “Day Month Year Hour Minute Second”
 (STAD 24 11 1976 15 41 49 –

Read more

Login and Out of a Meridian PBX and VOICEMAIL Systems

Launch HyperTerminal Set phone number to your modem dialin number Set terminal emulation to VT102            X Modem Dial… it should end up at a blank HyperTerminal window Type the password to access the PBX modem. This will not show up on the screen when you type it. The

Read more

Verifying Cisco IOS Image

Follow the below steps to verify the integrity of the IOS software on Cisco IOS routers. Confirm the current IOS image the router is using to boot. router#show version <omited> System image file is “flash0:c3900-universalk9-mz.SPA.153-2.T.bin” <omited> Log into Cisco website and find the IOS image. Mouse over

Read more

ASA – RSA Server Configuration

Adding a Server Group on Cisco ASA firewall Device Management User/AAA AAA Server Groups Click Add Enter desired Name for Server Group Select RADIUS as protocol Check Simultaneous for Accounting Mode In the server section below, click on Add Select the interface where the RSA server can

Read more

DMVPN – Migrating encryption from 3DES to AES 256

Follow steps to migrate from 2DES to AES 256 Create keyring normally Create an ISAKMP policy for AES 256 Create an ISAKMP policy for 3DES (or vise versa) Create ISAKMP profile with matching keyring and identity address Create Transform-set for 3DES Create Transform-set for AES 256(or vise

Read more

DMVPN – Issue with Tunnel database

If you using multiple IPSec profiles, you may run into multiple issues. Changing tunnel protection without rebooting: Follow sequence interface tunnel 20 shut exit ! interface tunnel 20 no tunnel protection ipsec profile DMVPN_IPS shared exit ! interface tunnel 20 no shut ! end Showing ISAKMP SA

Read more

Default management access settings for F5 products

Summary F5 ships BIG-IP, FirePass, and ARX systems with default values for several system settings. This article provides a summary of these settings to assist you with accessing the devices upon receipt from F5. The settings described in this article also apply to Enterprise Manager, BIG-IP Virtual

Read more

How to converting Lightweight to Autonomous AP

Option 1   The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30. Make sure that the PC contains the access point image file (such as c1200-k9w7-tar.122-15.JA.tar for a 1200 series access point) in the TFTP server

Read more

Configure ASA syslog for Tufin Secure Track

  logging enable logging timestamp logging facility 23 logging message 111008 level notifications logging device-id hostname logging list securetrack message 111008 logging list securetrack message 106100 logging list securetrack message 106023 logging trap securetrack logging host inside 1.2.3.4

Read more

Resolve WSA blocking Windows and Adobe Updates

After deploying our Cisco WSA – IronPort, Wwindows and Adobe updates and were prevented. This include the ability for Windows to retrieve print drivers from Microsoft. This is primarily because we require authentication for all users accessing the internet. I added the following URLs to a white

Read more