Sometimes you may have to swap a WSA out whether its due to RMA or you have rebuilt it. This Error is on the MSA or Management Appliance. Error — The host key for 10.a.b.111 appears to have changed. It is possible that someone is trying to
Read more →After deploying our Cisco WSA – IronPort, Wwindows and Adobe updates and were prevented. This include the ability for Windows to retrieve print drivers from Microsoft. This is primarily because we require authentication for all users accessing the internet. I added the following URLs to a white
Read more →Configuring the WSA and the ASA for FTP can be a little tricky. Log into the WSA Security Service à FTP Proxy Enable FTP Proxy Assign Port to listen on – Default is 21 Enable Caching Choose authentication option The remaining defaults are preferred Network à Transparent
Read more →Configuring Global Security Settings Network à Authentication Edit Global Settings Change default settings according to your preference. The “Redirect Hostname” must match the DNS name of the LAN/Data interface. The default time for remembering a client is 3600 Sec or one hour, I am changing mine to
Read more →The Web Cache Communication Protocol (WCCP) is a Cisco-developed content-routing technology that allows you to integrate cache engines (such as the Cisco Cache Engine 550) into your network infrastructure. Cisco IOS Release 12.1 and later releases allow the use of either Version 1 (WCCPv1) or Version 2
Read more →IronPort Configuration Use the Cisco IronPort Use Guide to configure and verify the following: Assuming that the WSA is pre-configured with IP Address, Routes, NTP, DNS, etc Verify that there is communication between the ASA and the management interface of the IronPort Appliance. Upgrade the AsyncOS Log
Read more →